anti-lock braking system (abs braking system) trainer

Learning Objectives/Experiments

Identification of system components
The trainer demonstrates structure and working principle of the auto ABS braking
Function introduction of main components of the ABS brake system;
Work principle introduction of the ABS brake system;
Demonstration of how the ABS brake system works when braking.
Measurement of the signals of the sensors and actuators by multimeter or oscilloscope;
Fault set and troubleshooting

Features

The working principle and process is displayed by the LED indicator on the panel.
And the change of the wheel speed can be monitored in time.
The complete schematics and test terminal of the ABS braking system are printed on the test panel, the signal such as voltage, resistance, frequency, etc. of various sensors can be measured through the test terminals.
Pressure gauges are installed on the bench which can display the hydraulic pressure changes in the master cylinder and the brake cylinder when braking.
After setting the fault, the trainees can use the instruments to check out the location and the failure through the fault troubleshooting exercises. The trainer uses ABS braking system
It is driven by motor and can demonstrate working principle of the ABS braking system also can show its structure

Specification/Technical data