CNC lathe trainer:  Model: XEEPL-PT-100

• Center Height: 100mm
• Distance Between Centers: 310mm
• Swing Over bed: 200mm
• Swing Over cross slide: 80mm
• Travel of cross slide: 80mm
• Headstock: Hole through mainspindle-16mm
• Spindle taper-MT3
• Type of drive: AC Motor
• Speed range(stepless) (r.p.m)- 50-3200
• Tailstock
• Sleeve:diameter-25mm
• Taper-MT2
• Stroke-40mm
• Axes control- 2axis (X & Z) SIMULTANEOUS
• Least count:
• X axis:0.005mm(dia.);
• Z axis: 0.01mm(Length);
• Rapid Traverse rate-700mm/min for X axis, 1400mm/min for Z axis;
• Feed rate-300mm/min for X axis(ON Radius) 1200mm/min for Z axis;
• Interpolation- Linear and Circular including Partial Arcs
• Command Type- Absolute and Incremental
• Data Entry-Through MDI keyboard RS 232C Port
• Backlash- Upto 2mm for both Drive- DC Stepper motor for both the axes;
• Tool Indexing-Eight steps
• Canned cycles- Turning, Facing, Grooving, Threading,Tapper turning, Chamfer, Corner Radii, Peck Drilling; Threading-Straight threading as well as Taper Threading in inch/metric with
• optional; FAST ‘’Chamfer-out’’ facility;
• Electrical Power-230V,50Hz,1KVA (With all necessary software, accessories & attachments)
• Operation and maintenance manual of all respective items and training to the faculties