ROCKWELL CUM BRINELL HARDNESS TESTING MACHINE:
AS PER IS: 1586- 2000 for Rockwell test, IS:2281, BS:240 & ASTM-E-1 0 for Brinell test.
INTRODUCTION:
The Hardness Testers have been designed and manufactured strictly conforming to IS. BS, ASTM, ISO and DIN Standards. Since 1966 for most exacting test requirements in the Laboratories and Workshops etc. These testers are designed and manufactured for measuring hardness of metals and alloys of all types, hard or soft, flat, round, tubular or irregular in shape. The testers are simple in design, easy to operate, yet very reliable and accurate.
Manually operated. Suitable for testing hardness of metals and alloys of all kinds, hard or soft, whether flat, round or irregular shape. Conforms to IS:1586-2000, BS:891 (Part 1 & 2) ASTM E-18 for Rockwell test. IS: 2281-2005, BS:240, ASTM E-10 for Brinell test.
Rockwell cum Brinell hardness tester, automatic load selection with automatic zero setting dial gauge. Facility for brinell test with 187.5 kgf load with 2.5mm ball indentor, additional load of 250 kgf with 5mm ball indentor for testing hardness of non ferrous metal.
TECHNICAL SPECIFICATIONS:
-
Loads : 60, 100, 150, 187.5, 250 kgf
-
Initial load : 10 kgf
-
Max. test height: 230mm
-
Depth of throat : 133mm
-
Supplied complete with the following accessories.
-
Testing Table 50mm dia - 1 No.
-
Testing table 38mm dia with `V` groove for round job
-
6 to 45mm dia - 1 No.
-
Diamond indentor 120 degree
-
Steel Ball indentor 1/16"
-
Test block rockwell `C`
-
Test block rockwell `B`
-
Allen spanners - 5 pcs
-
Clamping device - 1 No.
-
Dash pot oil - 1 bottle
-
Rubber bellow for elevating screw protection
-
Brinell Microscope - 1 No.
-
Steel Ball indentor 2.5mm - 1 No.
-
Test block HB 2.5/187.5 - 1 No.
-
Steel ball indentor 5mm - 1 No.
-
Instruction manual.
