FATIGUE TESTING MACHINE:
AS PER IS: 5075-1969
This machine is used to test the fatigue strength of materials and to draw S-N diagram by research institute, laboratories, material manufacturers and various industries. This is rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and located such that it experiences a uniform bending moment. The specimen is rotated at 4200 rpm by a motor. A complete cycle of reversed stresses in all fibres of the specimen is produced during each revolution.
Specifications:
1. |
Maximum bending moment |
kg cm |
200 |
2. |
Bending moment adjustable |
kg cm |
25-200 |
3. |
Ranges |
I - kg cm |
25-125 |
II - kg cm |
125-200 |
||
4. |
Griping dia of specimen |
mm |
12 |
5. |
Testing dia of specimen |
mm |
8 |
6. |
Rotating speed |
rpm |
4200 |
7. |
Accuracy of applied bending moment |
+ 1% |
|
8. |
Digital counter No. Of digits (0-999999) |
6 |
|
9. |
Power required |
HP/KW |
1.0/0.75 |
10. |
Main Supply |
3ph. |
440,V, 50 Hz A.C |
11. |
Overall Size (approx) |
mm |
1000 L x 500 W x 600 H |
12. |
Weight (approx) |
kg |
120 |
Office: S. N. 37/02, "Ashtavinayak Indl. Estate",
Parvati Nagar, Dhayari Narhe Road,
Next to Pari Robotics, Narhe, Pune-411041
Tel fax: (020) 24690312,
Email: sales@xeepl.com, xeepl.pune@gmail.com