POLDI HARDNESS TESTER:

FEATURES:

The Poldi Hardness Tester is suitable for measuring the Brinell Hardness of Steel, Cast iron, Brass Aluminum, Copper etc. This Poldi Hardness Tester is useful to test parts where bench type model is not useful. This type of machine is most ideal and simple for foundries, Workshops, Engineering Colleges, Technical Institutions etc.

PRINCIPLE:

Load is applied by a hammer blow on the specimen and a standard test bar in linear direction through a hardened steel ball of 10 mm dia. The impact load on both is the same. The extent of indentation on the specimen and the test bar depends on their hardness. The two diameters of indentations on test bar and specimen are measured by a magnifier supplied along with the tester. The hardness of the specimen can be determined, by referring got the chart supplied with the machine.

SPECIFICATION:

POLDI HARDNESS TESTER

• MATERIAL : ALLOY STEEL EN-8 OR EN-9
• DIA : 30 MM
• LENGTH : 85 MM

TUNGSTON CARBIDE BALL

• DIA: 10 MM

POLDI BAR

• MATERIAL: ALOOY STEEL EN-8 OR EN-9 OR CARBEN STEEL- WPS 
• SIZE : 12mm x 12mm x 150mm
• EYE PIECE : 8 X
• BRINELL MICROSCOPE: 25 X (OPTIONAL AT EXTRA COST)